R21xx-HP FlexFabric 11900 IP Multicast Configuration Guide

131
Displaying and maintaining IPv6 multicast routing
and forwarding
CAUTION:
The reset commands might cause IPv6 multicast data transmission failures.
Execute display commands in any view and reset commands in user view.
Task Command
Display information about IPv6 static
multicast MAC address table.
display mac-address [ mac-address [ vlan vlan-id ] | [ multicast ]
[ vlan vlan-id ] [ count ] ]
Display IPv6 multicast boundary
information.
display ipv6 multicast boundary { group [ ipv6-group-address
[ prefix-length ] ] | scope [ scope-id ] } [ interface interface-type
interface-number ]
Display information about the IPv6
multicast forwarding table (in standalone
mode).
display ipv6 multicast forwarding-table [ ipv6-source-address
[ prefix-length ] | ipv6-group-address [ prefix-length ] |
incoming-interface interface-type interface-number |
outgoing-interface { exclude | include | match } interface-type
interface-number | slot slot-number | statistics ] *
Display information about the IPv6
multicast forwarding table (in IRF mode).
display ipv6 multicast forwarding-table [ ipv6-source-address
[ prefix-length ] | ipv6-group-address [ prefix-length ] | chassis
chassis-number slot slot-number | incoming-interface
interface-type interface-number | outgoing-interface { exclude |
include | match } interface-type interface-number | statistics ] *
Display information about the IPv6
multicast routing table.
display ipv6 multicast routing-table [ ipv6-source-address
[ prefix-length ] | ipv6-group-address [ prefix-length ] |
incoming-interface interface-type interface-number |
outgoing-interface { exclude | include | match } interface-type
interface-number ] *
Display the RPF route information of the
specified IPv6 multicast source.
display ipv6 multicast rpf-info ipv6-source-address
[ ipv6-group-address ]
Clear forwarding entries from the IPv6
multicast forwarding table.
reset ipv6 multicast forwarding-table { { ipv6-source-address
[ prefix-length ] | ipv6-group-address [ prefix-length ] |
incoming-interface { interface-type interface-number } } * | all }
Clear routing entries from the IPv6
multicast routing table.
reset ipv6 multicast routing-table { { ipv6-source-address
[ prefix-length ] | ipv6-group-address [ prefix-length ] |
incoming-interface interface-type interface-number } * | all }
NOTE:
W
hen a routin
g
entry is removed, the associated forwarding entry is also removed. When a forwardin
g
entry is removed, the associated routing entry is also removed.