R21xx-HP FlexFabric 11900 IP Multicast Configuration Guide
Table Of Contents
- Title Page
- Contents
- Multicast overview
- Configuring IGMP snooping
- Overview
- IGMP snooping configuration task list
- Configuring basic IGMP snooping functions
- Configuring IGMP snooping port functions
- Configuring IGMP snooping policies
- Displaying and maintaining IGMP snooping
- IGMP snooping configuration examples
- Troubleshooting IGMP snooping
- Configuring multicast routing and forwarding
- Configuring IGMP
- Configuring PIM
- Overview
- Configuring PIM-DM
- Configuring PIM-SM
- Configuring common PIM features
- Displaying and maintaining PIM
- PIM configuration examples
- Troubleshooting PIM
- Configuring MLD snooping
- Overview
- MLD snooping configuration task list
- Configuring basic MLD snooping functions
- Configuring MLD snooping port functions
- Configuring MLD snooping policies
- Displaying and maintaining MLD snooping
- MLD snooping configuration examples
- Troubleshooting MLD snooping
- Configuring IPv6 multicast routing and forwarding
- Configuring MLD
- Configuring IPv6 PIM
- PIM overview
- Configuring IPv6 PIM-DM
- Configuring IPv6 PIM-SM
- Configuring common IPv6 PIM features
- Displaying and maintaining IPv6 PIM
- IPv6 PIM configuration examples
- Troubleshooting IPv6 PIM
- Support and other resources
- Index
140
Task at a
g
lance
• (Optional.) Configuring an interface as a static member interface
• (Optional.) Configuring an IPv6 multicast group filter
Adjusting MLD performance
(Optional.) Enabling MLD fast-leave processing
Configuring basic MLD functions
Before you configure basic MLD functions, complete the following tasks:
• Enable IPv6 forwarding and configure an IPv6 unicast routing protocol so that all devices can be
interoperable at the network layer.
• Configure IPv6 PIM.
• Determine the MLD version.
• Determine the IPv6 multicast group address and IPv6 multicast source address for static group
member configuration.
• Determine the ACL rule for IPv6 multicast group filtering.
Enabling MLD
Enable MLD on the interface on which IPv6 multicast group memberships are created and maintained.
To enable MLD:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enable IPv6 multicast
routing.
ipv6 multicast routing-enable Disable by default.
3. Enter interface view.
interface interface-type interface-number N/A
4. Enable MLD. mld enable Disabled by default.
Specifying the MLD version
Because MLD message types and formats vary with MLD versions, configure the same MLD version for all
routers on the same subnet. Otherwise, MLD cannot operate correctly.
To specify an MLD version:
Ste
p
Command Remarks
1. Enter system view. system-view
N/A
2. Enter interface view.
interface interface-type
interface-number
N/A