R21xx-HP FlexFabric 11900 IP Multicast Configuration Guide

180
[SwitchE-pim6] c-rp 1003::2 group-policy 2005
[SwitchE-pim6] quit
Verifying the configuration
# Display IPv6 PIM information on Switch A.
[SwitchA] display ipv6 pim interface
Interface NbrCnt HelloInt DR-Pri DR-Address
Vlan100 0 30 1 FE80::A01:201:1
(local)
Vlan101 1 30 1 FE80::A01:201:2
Vlan102 1 30 1 FE80::A01:201:3
# Display BSR information on Switch A.
[SwitchA] display ipv6 pim bsr-info
Scope: non-scoped
State: Accept Preferred
Bootstrap timer: 00:01:46
Elected BSR address: 1003::2
Priority: 20
Hash mask length: 128
Uptime: 00:04:22
# Display BSR information on Switch D.
[SwitchD] display ipv6 pim bsr-info
Scope: non-scoped
State: Candidate
Bootstrap timer: 00:01:45
Elected BSR address: 1003::2
Priority: 20
Hash mask length: 128
Uptime: 00:05:26
Candidate BSR address: 4002::1
Priority: 10
Hash mask length: 128
# Display BSR information on Switch E.
[SwitchE] display ipv6 pim bsr-info
Scope: non-scoped
State: Elected
Bootstrap timer: 00:01:48
Elected BSR address: 1003::2
Priority: 20
Hash mask length: 128
Uptime: 00:01:10
Candidate BSR address: 1003::2
Priority: 20
Hash mask length: 128
# Display RP information on Switch A.
[SwitchA] display ipv6 pim rp-info