R21xx-HP FlexFabric 11900 IP Multicast Configuration Guide

Table Of Contents

[SwitchB-Vlan-interface200] igmp enable

[SwitchB-Vlan-interface200] pim dm

[SwitchB-Vlan-interface200] quit

[SwitchB] interface vlan-interface 201

[SwitchB-Vlan-interface201] pim dm

[SwitchB-Vlan-interface201] quit

# On Switch C, enable IP multicast routing globally, enable IGMP on VLAN-interface 200, and

enable PIM-DM on each interface.

<SwitchC> system-view

[SwitchC] multicast routing-enable

[SwitchC] interface vlan-interface 200

[SwitchC-Vlan-interface200] igmp enable

[SwitchC-Vlan-interface200] pim dm

[SwitchC-Vlan-interface200] quit

[SwitchC] interface vlan-interface 202

[SwitchC-Vlan-interface202] pim dm

[SwitchC-Vlan-interface202] quit

4. Configure a multicast group filter on Switch A so that the hosts connected to VLAN-interface 100

can join the multicast group 224.1.1.1 only.

[SwitchA] acl number 2001

[SwitchA-acl-basic-2001] rule permit source 224.1.1.1 0

[SwitchA-acl-basic-2001] quit

[SwitchA] interface vlan-interface 100

[SwitchA-Vlan-interface100] igmp group-policy 2001

[SwitchA-Vlan-interface100] quit

Verifying the configuration

Display IGMP information on VLAN-interface 200 of Switch B.

[SwitchB] display igmp interface vlan-interface 200

Vlan-interface200(10.110.2.1):

IGMP is enabled.

IGMP version: 2

Query interval for IGMP: 125s

Other querier present time for IGMP: 255s

Maximum query response time for IGMP: 10s

Querier for IGMP: 10.110.2.1 (This router)

IGMP groups reported in total: 1