R21xx-HP FlexFabric 11900 IP Multicast Configuration Guide

90
Task Command
Display PIM routing table
information.
display pim routing-table [ group-address [ mask { mask-length | mask } ]
| source-address [ mask { mask-length | mask } ] | flags flag-value | fsm
| incoming-interface interface-type interface-number | mode mode-type
| outgoing-interface { exclude | include | match } interface-type
interface-number ] *
Display RP information in the
PIM-SM domain.
display pim rp-info [ group-address ]
PIM configuration examples
PIM-DM configuration example
Network requirements
As shown in Figure 32, VOD streams are sent to receiver hosts in multicast. The receiver groups of
different organizations form stub networks, and one or more receiver hosts exist in each stub network.
The entire PIM domain operates in the dense mode.
Host A and Host C are multicast receivers in two stub networks.
IGMPv2 runs between Switch A and N1 and between Switch B, Switch C, and N2.
Figure 32 Network diagram
Device Interface IP address Device Interface IP address
Switch A VLAN-interface 100 10.110.1.1/24 Switch D VLAN-interface 300 10.110.5.1/24
VLAN-interface 103 192.168.1.1/24 VLAN-interface 103 192.168.1.2/24
Source
10.110.5.100/24
PIM-DM
Switch A
Switch B
Switch C
Switch D
Receiver
Host A
Host B
Host C
Host D
Receiver
Vlan-int100
Vlan-int200
Vlan-int200
Vlan-int300 Vlan-int101
Vlan-int101
Vlan-
i
nt1
02
Vlan-int102
Vlan-int1
03
Vlan-
i
nt10
3