R21xx-HP FlexFabric 11900 IRF Command Reference

14
Predefined user roles
network-admin
Parameters
member-id: Specifies the ID of an IRF member.
text: Configures the IRF member description, a string of 1 to 127 characters.
Usage guidelines
Configure a description to identify the physical location or purpose of an IRF member for easy
maintenance.
This command is available in IRF mode. Changing the operating mode from IRF to standalone can cause
loss of the IRF member description even if you have saved the configuration.
Examples
# Configure a description for IRF member 1.
<Sysname> system-view
[Sysname] irf member 1 description F1Num001
irf member priority
Use irf member priority to change the priority of an IRF member.
Use undo irf member priority to restore the default.
Syntax
irf member member-id priority priority
undo irf member member-id priority
Default
IRF member priority is 1.
Views
System view
Predefined user roles
network-admin
Parameters
member-id: Specifies an IRF member ID in the range of 1 to 4.
priority: Sets priority in the range of 1 to 32. The greater the priority value, the higher the priority. A
member with higher priority is more likely to be the master.
Usage guidelines
Change member priority assignment to affect the maser election result.
This command is available in IRF mode. The new priority setting takes effect at the next master election,
but it does not trigger master election.
To assign an IRF priority to a device in standalone mode, use the irf priority command.
Examples
# Set the priority of IRF member 2 to 32.