R21xx-HP FlexFabric 11900 IRF Command Reference

24
# Assign a MAD IP address to IRF member 2 on VLAN-interface 3.
[Sysname-Vlan-interface3] mad ip address 192.168.0.2 255.255.255.0 member 2
Related commands
mad bfd enable
mad restore
Use mad restore to restore the normal MAD state of the IRF fabric in Recovery state.
Syntax
mad restore
Views
System view
Predefined user roles
network-admin
Usage guidelines
When MAD detects that an IRF fabric has split into multiple IRF fabrics, only the one whose master has
the lowest member ID among all the masters can still forward traffic. All the other fabrics are set in
Recovery state and cannot forward traffic.
If the active IRF fabric has failed to work before the IRF split problem is fixed, use this command to restore
an IRF fabric in Recovery state to take over the active IRF fabric role.
Examples
# Restore the normal MAD state of the IRF fabric in Recovery state.
<Sysname> system-view
[Sysname] mad restore
This command will restore the device from multi-active conflict state. Continue? [Y/N]:Y
Restoring from multi-active conflict state, please wait...
port group interface
Use port group interface to bind a physical port to an IRF port.
Use undo port group interface to remove the binding of a physical port and an IRF port.
Syntax
port group interface interface-type interface-number [ mode { enhanced | normal } ]
undo port group interface interface-name
Default
No physical ports are bound to any IRF port. After bound to an IRF port, a physical port operates in
enhanced mode.
Views
IRF port view
Predefined user roles
network-admin