R21xx-HP FlexFabric 11900 IRF Command Reference

Predefined user roles

network-admin

network-operator

Parameters

irf-port: Displays IRF port-specific load sharing modes.

member-id/port-number: Specifies an IRF port number. The member-id argument represents an IRF

member ID. The port-number argument represents the index number (1 or 2) of the IRF port on the

member device.

Usage guidelines

To display the global load sharing mode for IRF links, execute this command without the irf-port

[ member-id/port-number ] option.

To display the load sharing mode used on each IRF port on the IRF fabric, specify the irf-port keyword

but not any IRF port.

To display the load sharing mode used on a specific IRF port, specify both the irf-port keyword and the

member-id/port-number argument.

Examples

# Display the global load sharing mode for IRF links. In this example, because no user-defined global

load sharing mode has been configured, the default global load sharing mode applies.

<Sysname> display irf-port load-sharing mode

irf-port Load-Sharing Mode:

Layer 2 traffic: destination-mac address source-mac address

Layer 3 traffic: destination-ip address source-ip address

Layer 4 traffic: destination-port source-port

# Display the global load sharing mode for IRF links. In this example, because a global load sharing

mode based on source and destination MAC addresses have been configured, the configured mode

applies.

<Sysname> display irf-port load-sharing mode

irf-port Load-Sharing Mode:

destination-ip address, source-ip address

# Display the load sharing mode of IRF-port 1/1. In this example, because neither port-specific load

sharing mode nor user-defined global load sharing mode has been configured, the default global load

sharing mode applies.

<Sysname> display irf-port load-sharing mode irf-port 1/1

irf-port1/1 Load-Sharing Mode:

Layer 2 traffic: destination-mac address, source-mac address

Layer 3 traffic: destination-ip address, source-ip address

Layer 4 traffic: destination-port, source-port

# Display the load sharing mode of IRF-port 1/1 after destination MAC-based load sharing is configured

on the port.

<Sysname> display irf-port load-sharing mode irf-port 1/1

irf-port1/1 Load-Sharing Mode:

destination-mac address, source-mac address

# Display the load sharing mode used on each IRF port.

<Sysname> display irf-port load-sharing mode irf-port