R21xx-HP FlexFabric 11900 Layer 2 LAN Switching Command Reference

93
Examples
# Configure the minimum number of Selected ports as 3 in the aggregation group that corresponds to
Layer 2 aggregate interface Bridge-Aggregation 1.
<Sysname> system-view
[Sysname] interface bridge-aggregation 1
[Sysname-Bridge-Aggregation1] link-aggregation selected-port minimum 3
Related commands
link-aggregation selected-port maximum
port link-aggregation group
Use port link-aggregation group to assign the Ethernet interface to the specified aggregation group.
Use undo port link-aggregation group to remove the Ethernet interface from the aggregation group to
which it belongs.
Syntax
port link-aggregation group number
undo port link-aggregation group
Default
An Ethernet interface does not belong to any aggregation group.
Views
Layer 2 Ethernet interface view
Predefined user roles
network-admin
Parameters
number: Specifies the number of the aggregate interface that corresponds to an aggregation group. The
value range for the number argument is 1 to 1024.
Usage guidelines
An Ethernet interface can belong to only one aggregation group.
Examples
# Assign Layer 2 Ethernet interface Ten-GigabitEthernet 1/0/1 to Layer 2 aggregation group 1.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] port link-aggregation group 1
reset counters interface
Use reset counters interface to clear the statistics for the specified aggregate interface or interfaces.
Syntax
reset counters interface [ bridge-aggregation [ interface-number ] ]
Views
User view