R21xx-HP FlexFabric 11900 Layer 2 LAN Switching Command Reference

178
Field Descri
p
tion
FirmwareRev Firmware version.
SoftwareRev Software version.
SerialNum Serial number.
Manufacturer name Device manufacturer.
Model name Device model.
LLDP local-information of port 1 LLDP information to be sent out of port 1.
Port ID type
Port ID type:
• MAC address.
• Interface name.
Port ID Port ID, the value of which depends on the port ID type.
Management address interface
type
Numbering type of the interface identified by the management address.
Management address interface
ID
Index of the interface identified by the management address.
Management address OID Management address object ID.
Port VLAN ID(PVID) Port VLAN ID.
Port and protocol VLAN ID(PPVID) Port protocol VLAN ID.
Port and protocol VLAN
supported
Indicates whether protocol VLAN is supported on the port.
Port and protocol VLAN enabled Indicates whether protocol VLAN is enabled on the port.
VLAN name of VLAN 1 Name of VLAN 1.
Oper version DCBX version number.
Sequence number Number of DCBX TLV content changes.
Acknowledge number Times of synchronizing configurations by the peer device.
DCBX ETS subTLV info CoS-to-local priority mapping and bandwidth allocation.
Percentage Parentage of bandwidth allocated.
DCBX PFC subTLV info Indicates whether PFC is enabled.
P0-0 P1-0 P2-1 P3-1 P4-0
P5-0 P6-0 P7-0
Indicates whether PFC is enabled for each 802.1p priority on the local
end:
• 1—Enabled.
• 0—Disabled.
Number of traffic classes
supported
Capability set supported by PFC (displayed only in Rev 1.01).
DCBX APP subTLV info
Application protocol-to-CoS mapping.
This field is not displayed, and only the following CoS map information is
displayed in DCBX Rev 1.00.
ID type
Application protocol number type:
• APP protocol.
• TCP or UDP port.