R21xx-HP FlexFabric 11900 Layer 2 LAN Switching Command Reference

185
Field Descri
p
tion
System capabilities supported
Capabilities supported on the neighboring device:
• Repeater—Signal repeating is supported.
• Bridge—Switching is supported.
• WlanAccessPoint—The neighboring device can serve as a
wireless access point.
• Router—Routing is supported.
• Telephone—The neighboring device can serve as a telephone.
• DocsisCableDevice—The neighboring device can serve as a
DOCSIS-compliant cable device.
• StationOnly—The neighboring device can serve as a station only.
• Other—Functions other than those listed above are supported.
System capabilities enabled
Capabilities enabled on the neighboring device:
• Repeater—Signal repeating is enabled.
• Bridge—Switching is enabled.
• WlanAccessPoint—The neighboring device is serving as a
wireless access point.
• Router—Routing is enabled.
• Telephone—The neighboring device is serving as a telephone.
• DocsisCableDevice—The neighboring device is serving as a
DOCSIS-compliant cable device.
• StationOnly—The neighboring device is serving as a station only.
• Other—Functions other than those listed above are supported.
Management address OID Management address object ID.
Port and protocol VLAN ID(PPVID) Port protocol VLAN ID.
Port and protocol VLAN supported Indicates whether protocol VLAN is supported on the port.
Port and protocol VLAN enabled Indicates whether protocol VLAN is enabled on the port.
VLAN name of VLAN 12 Name of VLAN 12.
Oper version DCBX version number.
Sequence number Number of DCBX TLV content changes.
Acknowledge number Times of synchronizing configurations by the peer device.
DCBX ETS subTLV info CoS-to-local priority mapping and bandwidth allocation.
Percentage Percentage of bandwidth allocated.
DCBX PFC subTLV info Indicates whether PFC is enabled.
P0-0 P1-0 P2-1 P3-1 P4-0 P5-0
P6-0 P7-0
Indicates whether PFC is enabled for each 802.1p priority on the
local end:
• 1—Enabled.
• 0—Disabled.
Number of traffic classes supported Capability set supported by PFC (displayed only in Rev 1.01).
DCBX APP subTLV info
Application protocol–to-CoS mapping.
This field is not displayed and only the following CoS map
information is displayed in DCBX Rev 1.00.