R21xx-HP FlexFabric 11900 Layer 2 LAN Switching Command Reference

190
Field Descri
p
tion
Admin status
LLDP mode of the port:
• TxRx—The port can send and receive LLDPDUs.
• Rx_Only—The port can only receive LLDPDUs.
• Tx_Only—The port can only send LLDPDUs.
• Disable—The port cannot send or receive LLDPDUs.
Trap Flag Indicates whether trapping is enabled.
Polling interval LLDP polling interval, which is 0 when LLDP polling is disabled.
Number of neighbors Number of LLDP neighbors connecting to the port.
Number of MED neighbors Number of MED neighbors connecting to the port.
Number of CDP neighbors Number of CDP neighbors connecting to the port.
Number of sent optional TLV Number of optional TLVs contained in an LLDPDU sent through the port.
Number of received unknown TLV Number of unknown TLVs contained in a received LLDPDU.
display lldp tlv-config
Use display lldp tlv-config to display the types of advertisable optional LLDP TLVs of a port.
Syntax
display lldp tlv-config [ interface interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface interface-type interface-number: Specifies a port by its type and number.
Usage guidelines
If no port is specified, this command displays the types of advertisable optional TLVs of all ports.
Examples
# Display the types of advertisable optional LLDP TLVs of interface Ten-GigabitEthernet 1/0/1.
<Sysname> display lldp tlv-config interface ten-gigabitethernet 1/0/1
LLDP tlv-config of port 1[Ten-GigabitEthernet1/0/1]:
NAME STATUS DEFAULT
Basic optional TLV:
Port Description TLV YES YES
System Name TLV YES YES
System Description TLV YES YES
System Capabilities TLV YES YES
Management Address TLV YES YES
IEEE 802.1 extend TLV:
Port VLAN ID TLV YES YES