R21xx-HP FlexFabric 11900 Layer 2 LAN Switching Command Reference

196
Predefined user roles
network-admin
Usage guidelines
LLDP-CDP packets use only SNAP encapsulation.
Examples
# Configure the encapsulation format for LLDPDUs as SNAP on Ten-GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] lldp encapsulation snap
lldp fast-count
Use lldp fast-count to set the number of LLDPDUs sent each time fast LLDPDU transmission is triggered.
Use undo lldp fast-count to restore the default.
Syntax
lldp fast-count count
undo lldp fast-count
Default
The number is 3.
Views
System view
Predefined user roles
network-admin
Parameters
count: Sets the number of LLDPDUs sent each time fast LLDPDU transmission is triggered. The value range
is 1 to 10.
Usage guidelines
When fast LLDPDU transmission is enabled, the device shortens the LLDPDU transmit interval to 1 second
and restores it to the normal value after sending a certain number of LLDPDUs in succession. That number
can be changed by using this command.
Examples
# Configure the device to send four LLDPDUs each time fast LLDPDU transmission is triggered.
<Sysname> system-view
[Sysname] lldp fast-count 4
lldp global enable
Use lldp global enable to enable LLDP globally.
Use undo lldp global enable to disable LLDP globally.
Syntax
lldp global enable