R21xx-HP FlexFabric 11900 Layer 2 LAN Switching Command Reference

198
Examples
# Set the TTL multiplier to 6.
<Sysname> system-view
[Sysname] lldp hold-multiplier 6
Related commands
lldp timer tx-interval
lldp management-address-format string
Use lldp management-address-format string to change the data type of the value in the management
address TLV to string type.
Use undo lldp management-address-format to restore the default.
Syntax
lldp management-address-format string
undo lldp management-address-format
Default
The value in the management address TLV is numeric type.
Views
Layer 2 Ethernet interface view, Layer 3 Ethernet interface view
Predefined user roles
network-admin
Usage guidelines
LLDP neighbors must use the same data type for the value field in the management address TLV.
Examples
# Change the data type of the value in the management address TLV to string type on
Ten-GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] lldp management-address-format string
lldp notification med-topology-change enable
Use lldp notification med-topology-change enable to enable LLDP-MED trapping.
Use undo lldp notification med-topology-change enable to disable LLDP-MED trapping.
Syntax
lldp notification med-topology-change enable
undo lldp notification med-topology-change enable
Default
LLDP-MED trapping is disabled on ports.