R21xx-HP FlexFabric 11900 Layer 2 LAN Switching Command Reference

201
Default
The LLDPDU transmit delay is 2 seconds.
Views
System view
Predefined user roles
network-admin
Parameters
delay: Sets the LLDPDU transmit delay in the range of 1 to 8192 seconds.
Usage guidelines
It is a good practice to set the LLDPDU transmit delay to be no greater than a quarter of the LLDPDU
transmit interval.
If the LLDPDU transmit delay is greater than the LLDPDU transmit interval, the device uses the LLDPDU
transmit delay as the transmit interval.
Examples
# Set the LLDPDU transmit delay to 4 seconds.
<Sysname> system-view
[Sysname] lldp timer tx-delay 4
Related commands
lldp timer tx-interval
lldp timer tx-interval
Use lldp timer tx-interval to set the LLDPDU transmit interval.
Use undo lldp timer tx-interval to restore the default.
Syntax
lldp timer tx-interval interval
undo lldp timer tx-interval
Default
The LLDPDU transmit interval is 30 seconds.
Views
System view
Predefined user roles
network-admin
Parameters
interval: Sets the LLDPDU transmit interval in the range of 5 to 32768 seconds.
Usage guidelines
It is a good practice to set the LLDPDU transmit interval to be no less than four times the LLDPDU transmit
delay.