R21xx-HP FlexFabric 11900 Layer 2 LAN Switching Command Reference

14
Field Description
Link
Physical link state of the interface:
• UP—The link is up.
• DOWN—The link is physically down.
• ADM—The link has been administratively shut down. To recover its
physical state, run the undo shutdown command.
• Stby—The interface is a standby interface.
Protocol
Protocol connection state of the interface:
• UP.
• DOWN.
• UP(s)—The link of the interface is an on-demand link or not present at
all.
Description
Interface description configured by using the description command. If the
description keyword is not specified in the display interface brief
command, the Description field displays at most 27 characters. If the
description keyword is specified in the display interface brief command,
the field displays the full interface description.
The brief information of interface(s)
under bridge mode:
Brief information about Layer 2 interfaces.
Speed or Duplex: (a)/A - auto; H -
half; F – full
If the speed of an interface is automatically negotiated, its speed attribute
includes the auto negotiation flag, indicated by the letter a in
parentheses.
If the duplex mode of an interface is automatically negotiated, its duplex
mode attribute includes the following options:
• (a)/A—Auto negotiation.
• H—Half negotiation.
• F—Full negotiation.
Type: A - access; T - trunk; H –
hybrid
Link type options for Ethernet interfaces.
Speed Interface rate, in bps.
Duplex
Duplex mode of the interface:
• A—Autonegotiation.
• F—Full duplex.
• F(a)—Autonegotiated full duplex.
• H—Half duplex.
• H(a)—Autonegotiated half duplex.
Type
Link type of the interface:
• A—Access.
• H—Hybrid.
• T—Trunk.
PVID Port VLAN ID.