R21xx-HP FlexFabric 11900 Layer 2 LAN Switching Command Reference

19
Syntax
interface interface-type interface-number
Views
System view
Predefined user roles
network-admin
Parameters
interface-type: Specifies an interface type.
interface-number: Specifies an interface number.
Examples
# Enter Ten-GigabitEthernet 1/0/1 interface view.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1]
jumboframe enable
Use jumboframe enable to allow jumbo frames within the specified length to pass through.
Use undo jumboframe enable to prevent jumbo frames from passing through.
Syntax
jumboframe enable [ value ]
undo jumboframe enable
Default
The switch allows jumbo frames within 9216 bytes to pass through.
Views
Layer 2 Ethernet interface view, Layer 3 Ethernet interface view
Predefined user roles
network-admin
Parameters
value: Sets the maximum length of Ethernet frames that are allowed to pass through, in the range of 1536
to 9216 bytes.
Usage guidelines
If you set the value argument multiple times, the most recent configuration takes effect.
Examples
# Enable jumbo frames to pass through Ten-GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] jumboframe enable