R21xx-HP FlexFabric 11900 Layer 2 LAN Switching Command Reference

32
Field Description
Unit
Storm control threshold unit:
• pps.
• kbps.
• percentage.
CtrlMode
Protective action (block or shutdown) taken on the port when the upper
threshold is reached. N/A indicates that no protective action is configured.
Status
Packet forwarding status:
• forwarding—The port is forwarding traffic correctly.
• shutdown—The port has been shut down.
• block—The port drops the type of traffic.
Trap
Status of the storm control threshold event trap switch:
• on—The port sends threshold event traps.
• off—The port does not send threshold event traps.
Log
Status of the storm control threshold event log switch:
• on—The port sends threshold event log messages.
• off—The port does not send threshold event log messages.
SwitchNum
Number of forwarding state changes of the interface.
When the SwitchNum count reaches 65,535, it resets automatically.
mdix-mode
IMPORTANT:
Fiber ports and 10-GE copper ports do not support this command.
Use mdix-mode to configure the Medium Dependent Interface Cross-Over (MDIX) mode of an Ethernet
interface.
Use undo mdix-mode to restore the default.
Syntax
mdix-mode { automdix | mdi| mdix }
undo mdix-mode
Default
Ethernet interfaces operate in automdix mode.
Views
Layer 2 Ethernet interface view
Predefined user roles
network-admin
Parameters
automdix: Specifies that the interface negotiates pin roles with its peer.