R21xx-HP FlexFabric 11900 Layer 2 LAN Switching Command Reference

72
Ethernet link aggregation commands
default
Use default to restore the default settings for an aggregate interface.
Syntax
default
Views
Layer 2 aggregate interface view
Predefined user roles
network-admin
Usage guidelines
CAUTION:
The default command might interrupt ongoing network services. Make sure you are fully aware of the
impacts of this command when you perform it on a live network.
This command might fail to restore the default settings for some commands for reasons such as command
dependencies and system restrictions. Use the display this command in interface view to identify these
commands, and then use their undo forms or follow the command reference to individually restore their
default settings. If your restoration attempt still fails, follow the error message instructions to resolve the
problem.
Examples
# Restore the default settings for Layer 2 aggregate interface 1.
<Sysname> system-view
[Sysname] interface bridge-aggregation 1
[Sysname-Bridge-Aggregation1] default
This command will restore the default settings. Continue? [Y/N]:y
description
Use description to configure a description for an interface.
Use undo description to restore the default setting.
Syntax
description text
undo description
Default
The description of an interface is the interface-name plus Interface. For example, the default description
of Bridge-Aggregation1 is Bridge-Aggregation1 Interface.