R21xx-HP FlexFabric 11900 Layer 2 LAN Switching Command Reference

75
Table 16 Command output
Field Descri
p
tion
Bridge-Aggregation1 current state
Layer 2 aggregate interface status:
• DOWN (Administratively down)—The interface is
administratively shut down with the shutdown
command.
• DOWN—The interface is administratively up but
physically down (possibly because no physical link
is present or the link is faulty).
• UP—The Ethernet interface is both administratively
and physically up.
IP Packet Frame Type
IPv4 packet frame format.
The value PKTFMT_ETHNT_2 indicates that packets
are encapsulated in Ethernet II format.
Unknown-speed mode, unknown-duplex mode The interface speed and duplex mode are unknown.
30Gbps-speed mode, full-duplex mode
The interface speed is 30 Gbps, and the duplex mode
of the interface is half duplex.
PVID Port VLAN ID (PVID).
Port link-type Port link type: access, trunk, or hybrid.
VLAN Passing: 1(default vlan), 10,20
IDs of VLANs whose packets actually pass through the
aggregate interface.
This field is displayed when the port link type is trunk.
VLAN permitted: 1(default vlan), 10,20
IDs of VLANs whose packets are allowed to pass
through the aggregate interface.
This field is displayed when the port link type is trunk.
Trunk port encapsulation: IEEE 802.1q
The encapsulation type of the trunk port is IEEE
802.1q.
Tagged Vlan
Packets from the specified VLANs are sent out of this
interface with a VLAN tag:
• Tagged Vlan: none—All packets are sent out of
this interface without a VLAN tag.
• Tagged Vlan: 1—Packets from VLAN 1 are sent out
of this interface with a VLAN tag.
This field is displayed when the port link type is access
or hybrid.
Untagged Vlan
Packets from the specified VLANs are sent out of this
interface without a VLAN tag:
• Untagged Vlan: none—All packets are sent out of
this interface with a VLAN tag.
• Untagged Vlan: 1—Packets from VLAN 1 are sent
out of this interface without a VLAN tag.
This field is displayed when the port link type is access
or hybrid.