R21xx-HP FlexFabric 11900 Layer 2 LAN Switching Command Reference

76
Field Descri
p
tion
Last clearing of counters
Time when the reset counters interface command was
last used to clear the interface statistics.
Never indicates the reset counters interface command
has never been used on the interface since the
device's startup.
Last 300 seconds input/output rate Average input/output rate over the last 300 seconds.
Input/Output (total) Statistics of all packets received/sent on the interface.
Input/Output (normal)
Statistics of all normal packets received/sent on the
interface.
The brief information of interface(s) under bridge
mode
Brief information about Layer 2 interfaces.
Link: ADM - administratively down; Stby - standby
Link status:
• ADM—The interface has been administratively
shut down. To recover its physical layer state, run
the undo shutdown command.
• Stby—The interface is operating as a backup
interface.
Speed or Duplex: (a)/A - auto; H - half; F - full
If the speed of an interface is automatically
negotiated, its speed attribute includes the auto
negotiation flag, indicated by the letter a in
parentheses.
If the duplex mode of an interface is automatically
negotiated, its duplex mode attribute includes the auto
negotiation flag, indicated by the letter a in
parentheses or a capital A. The letter H indicates the
half duplex mode, and the letter F indicates the full
duplex mode.
Type: A - access; T - trunk; H - hybrid Link type options for Ethernet interfaces.
Interface Abbreviated interface name.
Link Physical link state of the interface.
Speed Interface speed, in bps.
display lacp system-id
Use display lacp system-id to display the system ID of the local system.
Syntax
display lacp system-id
Views
Any view
Predefined user roles
network-admin
network-operator