R21xx-HP FlexFabric 11900 Layer 2 LAN Switching Command Reference

77
Usage guidelines
You can use the lacp system-priority command to change the LACP priority of the local system. You
specify the LACP priority value in decimal format in the lacp system-priority command, but it is displayed
as a hexadecimal value by the display lacp system-id command.
Examples
# Display the local system ID.
<Sysname> display lacp system-id
Actor System ID: 0x8000, 0000-fc00-6504
Table 17 Command output
Field Descri
p
tion
Actor System ID: 0x8000, 0000-fc00-6504
Local system ID, which comprises the system LACP priority
(0x8000 in this sample output) and the system MAC address
(0000-FC00-6504 in this sample output).
Related commands
lacp system-priority
display link-aggregation load-sharing mode
Use display link-aggregation load-sharing mode to display global or group-specific link-aggregation
load sharing criteria.
Syntax
display link-aggregation load-sharing mode [ interface [ bridge-aggregation interface-number ] ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
bridge-aggregation: Displays the load sharing criteria of the aggregation group that corresponds to the
specified Layer 2 aggregate interface.
interface-number: Specifies an existing aggregate interface number.
Usage guidelines
To display the global link-aggregation load sharing criteria, execute the command without the interface
keyword.
To display all group-specific load sharing criteria, execute the command with the interface keyword, but
do not specify a particular interface.
To display the load sharing criteria of a particular aggregation group, execute the command with the
aggregate interface specified.
The bridge-aggregation keyword becomes available only after you create Layer 2 aggregate interfaces
on the device.