R21xx-HP FlexFabric 11900 Layer 2 LAN Switching Command Reference

81
Usage guidelines
Information about the remote system for a static link aggregation group is displayed as none, because
static link aggregation groups are unaware of information about the peer groups.
Examples
# Display the summary information for all aggregation groups.
<Sysname> display link-aggregation summary
Aggregate Interface Type:
BAGG -- Bridge-Aggregation, RAGG -- Route-Aggregation
Aggregation Mode: S -- Static, D -- Dynamic
Loadsharing Type: Shar -- Loadsharing, NonS -- Non-Loadsharing
Actor System ID: 0x8000, 000f-e267-6c6a
AGG AGG Partner ID Selected Unselected Share
Interface Mode Ports Ports Type
-------------------------------------------------------------------------------
BAGG1 S none 1 0 Shar
BAGG10 D 0x8000, 000f-e267-57ad 2 0 Shar
Table 20 Command output
Field Descri
p
tion
Aggregate Interface Type
Aggregate interface type:
• BAGG—Layer 2 aggregate interface.
• RAGG—Layer 3 aggregate interface.
Aggregation Mode
Aggregation group type:
• S—Static link aggregation.
• D—Dynamic aggregation.
Loadsharing Type
Load-sharing type:
• Shar—Load sharing.
• NonS—Non-load sharing.
Actor System ID
Local system ID, which comprises the system LACP priority and the system
MAC address.
AGG Interface Type and number of the aggregate interface.
AGG Mode Aggregation group type.
Partner ID
System ID of the partner, which comprises the system LACP priority and the
system MAC address.
Selected Ports Total number of Selected ports.
Unselected Ports Total number of Unselected ports.
Share Type Load-sharing type.
display link-aggregation verbose
Use display link-aggregation verbose to display detailed information about the aggregation groups that
correspond to the aggregate interfaces.