R21xx-HP FlexFabric 11900 Layer 2 LAN Switching Command Reference

Syntax

display link-aggregation verbose [ bridge-aggregation [ interface-number ] ]

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

bridge-aggregation: Displays detailed information about the Layer 2 aggregation groups that

correspond to Layer 2 aggregate interfaces.

interface-number: Specifies an existing aggregate interface by its number.

Usage guidelines

If you specify only bridge-aggregation, this command displays information about all Layer 2

aggregation groups.

If no aggregate interface type is specified, this command displays information about all aggregation

groups.

The bridge-aggregation keyword is available only after you create Layer 2 aggregate interfaces on the

device.

Examples

# Display detailed information about the aggregation group that corresponds to Layer 2 aggregate

interface Bridge-Aggregation 10, which is a dynamic aggregation group.

<Sysname> display link-aggregation verbose bridge-aggregation 10

Loadsharing Type: Shar -- Loadsharing, NonS -- Non-Loadsharing

Port Status: S -- Selected, U -- Unselected

Flags: A -- LACP_Activity, B -- LACP_Timeout, C -- Aggregation,

D -- Synchronization, E -- Collecting, F -- Distributing,

G -- Defaulted, H -- Expired

Aggregate Interface: Bridge-Aggregation10

Aggregation Mode: Dynamic

Loadsharing Type: Shar

System ID: 0x8000, 000f-e267-6c6a

Local:

Port Status Priority Oper-Key Flag

--------------------------------------------------------------------------------

XGE1/0/1 S 32768 2 {ACDEF}

XGE1/0/2 S 32768 2 {ACDEF}

Remote:

Actor Partner Priority Oper-Key SystemID Flag

--------------------------------------------------------------------------------

XGE1/0/1 1 32768 2 0x8000, 000f-e267-57ad {ACDEF}

XGE1/0/2 2 32768 2 0x8000, 000f-e267-57ad {ACDEF}