R21xx-HP FlexFabric 11900 Layer 2 LAN Switching Command Reference

86
Default
The system LACP priority is 32768.
Views
System view
Predefined user roles
network-admin
Parameters
system-priority: Specifies the system LACP priority in the range of 0 to 65535. The smaller the value, the
higher the system LACP priority.
Examples
# Set the system LACP priority to 64.
<Sysname> system-view
[Sysname] lacp system-priority 64
Related commands
link-aggregation port-priority
link-aggregation global load-sharing mode
Use link-aggregation global load-sharing mode to configure the global link-aggregation load sharing
criteria.
Use undo link-aggregation global load-sharing mode to restore the default setting.
Syntax
link-aggregation global load-sharing mode { destination-ip | destination-mac | destination-port |
ingress-port | source-ip | source-mac | source-port } *
undo link-aggregation global load-sharing mode
Default
The system automatically selects global load sharing criteria according to the packet type.
Views
System view
Predefined user roles
network-admin
Parameters
destination-ip: Performs load sharing in link aggregation groups based on destination IP address.
destination-mac: Performs load sharing in link aggregation groups based on destination MAC address.
destination-port: Performs load sharing in link aggregation groups based on destination port.
ingress-port: Performs load sharing in link aggregation groups based on ingress port.
source-ip: Performs load sharing in link aggregation groups based on source IP address.
source-mac: Performs load sharing in link aggregation groups based on source MAC address.
source-port: Performs load sharing in link aggregation groups based on source port.