R21xx-HP FlexFabric 11900 Layer 2 LAN Switching Configuration Guide

14
Step Command Remarks
3. Set the MTU. mtu size
The default setting is 1500
bytes.
Displaying and maintaining an Ethernet interface
Execute display commands in any view and reset commands in user view.
Task Command
Display interface traffic statistics.
display counters { inbound | outbound } interface [ interface-type
[ interface-number ] ]
Display traffic rate statistics of interfaces in
up state over the last sampling interval.
display counters rate { inbound | outbound } interface
[ interface-type [ interface-number ] ]
Display the operational and status
information of the specified interface or all
interfaces.
display interface [ interface-type [ interface-number ] ]
Display summary information about the
specified interface or all interfaces.
display interface [ interface-type [ interface-number ] ] brief
[ description ]
Display information about dropped
packets on the specified interface or all
interfaces.
display packet-drop { interface [ interface-type
[ interface-number ] ] | summary }
Display information about storm control
on the specified interface or all interfaces.
display storm-constrain [ broadcast | multicast | unicast ]
[ interface interface-type interface-number ]
Clear the interface statistics. reset counters interface [ interface-type [ interface-number ] ]
Clear the statistics of dropped packets on
the specified interfaces.
reset packet-drop interface [ interface-type [ interface-number ] ]