R21xx-HP FlexFabric 11900 Layer 2 LAN Switching Configuration Guide

43
The load sharing criteria configuration takes effect on only known unicast packets, and can change the
load sharing criteria for known unicast packets. Broadcast packets, multicast packets, and unknown
unicast packets always use the default load sharing criteria.
Configuring the global link-aggregation load sharing criteria
Step Command Remarks
1. Enter system view.
system-view N/A
2. Configure the global
link-aggregation load
sharing criteria.
link-aggregation global load-sharing
mode { { destination-ip |
destination-mac | destination-port |
ingress-port | source-ip | source-mac |
source-port } *
By default, the system
automatically selects the global
load sharing criteria according to
the packet type.
In system view, the switch supports the following load-sharing criteria and combinations:
• Load-sharing criteria automatically determined based on the packet type
• Source IP address
• Destination IP address
• Source MAC address
• Destination MAC address
• Source IP address and destination IP address
• Source IP address and source port
• Destination IP address and destination port
• Source IP address, source port, destination IP address, and destination port
• Any combination of ingress port, source MAC address, and destination MAC address
Configuring group-specific load sharing criteria
Step Command Remarks
1. Enter system view.
system-view N/A
2. Enter aggregate interface
view.
interface bridge-aggregation
interface-number
N/A
3. Configure the load sharing
criteria for the aggregation
group.
link-aggregation load-sharing mode
{ { destination-ip | destination-mac |
mpls-label1 | mpls-label2 | source-ip
| source-mac } * | flexible }
The default settings are the same
as the global load-sharing
criteria.
In Layer 2 aggregate interface view, the switch supports the following load-sharing criteria and
combinations:
• Load-sharing criteria automatically determined based on the packet type
• Source IP address
• Destination IP address
• Source MAC address
• Destination MAC address