R21xx-HP FlexFabric 11900 Layer 2 LAN Switching Configuration Guide

[DeviceA-Bridge-Aggregation1] port trunk permit vlan 10 20

[DeviceA-Bridge-Aggregation1] quit

2. Configure Device B in the same way Device A is configured. (Details not shown.)

3. Verify the configurations by displaying detailed information about all aggregation groups on

Device A.

[DeviceA] display link-aggregation verbose

Loadsharing Type: Shar -- Loadsharing, NonS -- Non-Loadsharing

Port Status: S -- Selected, U -- Unselected

Flags: A -- LACP_Activity, B -- LACP_Timeout, C -- Aggregation,

D -- Synchronization, E -- Collecting, F -- Distributing,

G -- Defaulted, H -- Expired

Aggregate Interface: Bridge-Aggregation1

Aggregation Mode: Dynamic

Loadsharing Type: Shar

System ID: 0x8000, 000f-e267-6c6a

Local:

Port Status Priority Oper-Key Flag

--------------------------------------------------------------------------------

XGE1/0/1 S 32768 1 {ACDEF}

XGE1/0/2 S 32768 1 {ACDEF}

XGE1/0/3 S 32768 1 {ACDEF}

Remote:

Actor Partner Priority Oper-Key SystemID Flag

--------------------------------------------------------------------------------

XGE1/0/1 1 32768 1 0x8000, 000f-e267-57ad {ACDEF}

XGE1/0/2 2 32768 1 0x8000, 000f-e267-57ad {ACDEF}

XGE1/0/3 3 32768 1 0x8000, 000f-e267-57ad {ACDEF}

The output shows that link aggregation group 1 is a default load-shared Layer 2 dynamic

aggregation group and it contains three Selected ports.

Layer 2 aggregation load sharing configuration example

Network requirements

As shown in Figure 9:

• Configure two Layer 2 static aggregation groups (1 and 2) on Device A and Device B respectively,

and enable VLAN 10 at one end of the aggregate link to communicate with VLAN 10 at the other

end, and VLAN 20 at one end to communicate with VLAN 20 at the other end.

• Configure the load sharing criterion for link aggregation group 1 as the source MAC addresses of

packets and the load sharing criterion for link aggregation group 2 as the destination MAC

addresses of packets to enable traffic to be load-shared across aggregation group member ports.