R21xx-HP FlexFabric 11900 Layer 3 IP Routing Command Reference

123
• Starts a new round of DR/BDR election.
• Does not remove previous OSPF configurations.
The system prompts you to select whether to reset OSPF process upon execution of this command.
Examples
# Reset all OSPF processes.
<Sysname> reset ospf process
Reset OSPF process? [Y/N]:y
reset ospf redistribution
Use reset ospf redistribution to restart route redistribution.
Syntax
reset ospf [ process-id ] redistribution
Views
User view
Predefined user roles
network-admin
Parameters
process-id: Specifies an OSPF process by its ID in the range of 1 to 65535.
Usage guidelines
If no process ID is specified, this command restarts route redistribution for all OSPF processes.
Examples
# Restart route redistribution.
<Sysname> reset ospf redistribution
rfc1583 compatible
Use rfc1583 compatible to enable compatibility with RFC 1583.
Use undo rfc1583 compatible to disable compatibility with RFC 1583.
Syntax
rfc1583 compatible
undo rfc1583 compatible
Default
Compatibility with RFC 1583 is enabled.
Views
OSPF view
Predefined user roles
network-admin