R21xx-HP FlexFabric 11900 Layer 3 IP Routing Command Reference

141
Lsp Timer Value : L12 33
Lsp Transmit-Throttle Count : L12 5
Cost : L1 10 L2 10
Priority : L1 64 L2 64
IPv4 BFD : Disabled
IPv6 BFD : Disabled
Table 34 Command output
Field Descri
p
tion
Interface Interface type and number.
Id Circuit ID.
IPv4.State IPv4 state.
IPv6.State IPv6 state.
MTU Interface MTU.
Type Interface link adjacency type.
DIS Whether the interface is elected as the DIS or not.
SNPA Address Subnet access point address.
IP Address Primary IP address.
Secondary IP Address(es) Secondary IP addresses.
IPv6 Link Local Address IPv6 link local address.
Csnp Timer Value Interval for sending CSNP packets.
Hello Timer Value Interval for sending Hello packets.
Hello Multiplier Value Number of invalid Hello packets.
Lsp Timer Value Minimum interval for sending LSP packets.
Lsp Transmit-Throttle Count Number of LSP packets sent each time.
Cost Cost of the interface.
Priority DIS priority.
IPv4 BFD
Whether BFD for IS-IS is enabled:
• Disabled.
• Enabled.
IPv6 BFD
Whether BFD for IPv6 IS-IS is enabled:
• Disabled.
• Enabled.
# Display IS-IS interface statistics.
<Sysname> display isis interface statistics
Interface Statistics information for ISIS(1)
--------------------------------------------
Type IPv4 Up/Down IPv6 Up/Down
LAN 1/0 0/0
P2P 0/0 0/0