R21xx-HP FlexFabric 11900 Layer 3 IP Routing Command Reference

142
Table 35 Command output
Field Descri
p
tion
Type
Network type of the interface:
• LAN for broadcast network.
• P2P for point-to-point network.
IPv4 UP Number of IS-IS interfaces in up state.
IPv4 Down Number of IS-IS interfaces in down state.
IPv6 UP
Number of IS-ISv6 interfaces in up state. If IPv6 is not
enabled, this field displays 0.
IPv6 Down
Number of IS-ISv6 interfaces in down state. If IPv6 is not
enabled, this field displays 0.
display isis lsdb
Use display isis lsdb to display IS-IS link state database.
Syntax
display isis lsdb [ [ level-1 | level-2 ] | local | [ lsp-id lspid | lsp-name lspname ] | verbose ] *
[ process-id ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
level-1: Displays the level-1 LSDB.
level-2: Displays the level-2 LSDB.
local: Displays LSP information generated locally.
lsp-id lspid: Specifies an LSP ID, in the form of sysID. Pseudo ID-fragment num, where sysID represents the
originating node or pseudo node, and Pseudo ID is separated by a dot from sysID and by a hyphen from
fragment num.
lspname: Specifies the LSP name, in the form of Symbolic name.Pseudo ID-fragment num, where Pseudo
ID is separated by a dot from Symbolic name and by a hyphen from fragment num. If the Pseudo ID is 0,
specify the LSP name in the form Symbolic name-fragment num.
verbose: Displays LSDB detailed information. Without this argument, the command displays brief
information about LSDB.
process-id: Specifies an IS-IS process by its ID in the range of 1 to 65535 to display the LSDB of the IS-IS
process.
Usage guidelines
If no level is specified, the command displays both Level-1 and Level-2 link state databases.
If no IS-IS process ID is specified, the command displays link state databases for all IS-IS processes.