R21xx-HP FlexFabric 11900 Layer 3 IP Routing Command Reference

144
INTF ADDR 8.8.8.7
NBR ID
7777.8888.1111.01 COST: 10
IP-Internal
8.8.8.0 255.255.255.0 COST: 10
7777.8888.1111.01-00* 0x00000004 0xb4a4 1124 55 0/0/0
SOURCE 7777.8888.1111.01
NLPID IPV4
NBR ID
5555.1111.1111.00 COST: 0
NBR ID
7777.8888.1111.00 COST: 0
*-Self LSP, +-Self LSP(Extended), ATT-Attached, P-Partition, OL-Overload
Table 36 Command output
Field Descri
p
tion
LSPID LSP ID.
Seq Num LSP sequence number.
Checksum LSP checksum.
Holdtime LSP lifetime, which decreases as time elapses.
Length LSP length.
ATT/P/OL
• ATT—Attach bit.
• P—Partition bit.
• OL—Overload bit.
1 means the LSP bit is set and 0 means the LSP bit is not set.
SOURCE System ID of the originating router.
NLPID Network layer protocol the originating router runs.
AREA ADDR Area address of the originating router.
INTF ADDR IP address of the originating router’s IS-IS interface.
INTF ADDR V6 IPv6 address of the originating router’s IS-ISv6 interface.
NBR ID Neighbor ID of the originating router.
IP-Internal Internal IP address and mask of the originating router.
IP-External External IP address and mask of the originating router.
IP-Extended Extended IP address and mask of the originating router.
COST Cost.
Auth Authentication information of the originating router.
IPV6 Internal IPv6 address and prefix of the originating router.
IPV6-Ext External IPv6 address and prefix of the originating router.