R21xx-HP FlexFabric 11900 Layer 3 IP Routing Command Reference

147
Area Address(es): 18
Peer IP Address(es):8.8.8.5
Uptime: 00:03:17
Adj Protocol: IPv4
Table 38 Command output
Field Descri
p
tion
System Id System ID of the neighbor.
Interface Interface connecting to the neighbor.
Circuit Id Circuit ID.
State Circuit state.
HoldTime
Within the holdtime, if no hellos are received from the neighbor, the neighbor
is considered down. If a hello is received, the holdtime is reset to the initial
value.
Type
Circuit type:
• L1—Means the circuit type is Level-1 and the neighbor is a Level-1 router.
• L2—Means the circuit type is Level-2 and the neighbor is a Level-2 router.
• L1(L1L2)—Means the circuit type is Level-1 and the neighbor is a Level-1-2
router.
• L2(L1L2)—Means the circuit type is Level-2 and the neighbor is a Level-1-2
router.
PRI DIS priority of the neighbor.
Area Address(es) Area address of the neighbor.
Peer IP Address(es) IP address of the neighbor.
Uptime Time elapsed since the neighbor relationship was formed.
Adj Protocol Adjacency protocol.
# Display IS-IS neighbor statistics.
<Sysname> display isis peer statistics
Peer Statistics information for ISIS(1)
---------------------------------------
Type IPv4 Up/Init IPv6 Up/Init
LAN Level-1 1/0 0/0
LAN Level-2 1/0 0/0
P2P 0/0 0/0
Table 39 Command output
Field Descri
p
tion
Type
Neighbor type:
• LAN Level-1—Number of Level-1 neighbors whose network type is broadcast.
• LAN Level-2—Number of Level-2 neighbors whose network type is broadcast.
• P2P—Number of neighbors whose network type is P2P.
IPv4 Up Number of IPv4 neighbors in up state.