R21xx-HP FlexFabric 11900 Layer 3 IP Routing Command Reference

152
Field Descri
p
tion
Flag
Route state flag:
• R—The route has been installed into the routing table.
• L—The route has been flooded in an LSP.
• U—Route leaking flag. Setting it to UP can prevent an LSP sent
from L2 to L1 from being sent back to L2.
Next Hop Next hop.
Interface Output interface.
ExitIndex Index of the output interface.
display isis statistics
Use display isis statistics to display IS-IS statistics.
Syntax
display isis statistics [ level-1 | level-1-2 | level-2 ] [ process-id ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
level-1: Displays IS-IS Level-1 statistics.
level-1-2: Displays IS-IS Level-1-2 statistics.
level-2: Displays IS-IS Level-2 statistics.
process-id: Displays statistics for an IS-IS process specified by its ID in the range of 1 to 65535.
Usage guidelines
If no level is specified, this command displays both Level-1 and Level-2 routing information.
If no IS-IS process ID is specified, this command displays the statistics for all IS-IS processes.
Examples
# Display IS-IS statistics.
<Sysname> display isis statistics
Statistics information for ISIS(1)
----------------------------------
Level-1 Statistics
------------------
MTR(Basic-V4)
Learnt routes information: