R21xx-HP FlexFabric 11900 Layer 3 IP Routing Command Reference

228
• If the network-address mask or network-address mask-length argument is specified, and the
longest-match keyword is not specified, the command displays flap statistics of the BGP IPv4
unicast route that matches both the specified destination network address and the mask (or mask
length).
The command with the unicast keyword has the same effect as that without the unicast keyword.
Examples
# Display BGP IPv4 unicast route flap statistics for the public network.
<Sysname> display bgp routing-table flap-info ipv4
Total number of routes: 1
BGP local router ID is 192.168.1.135
Status codes: * - valid, > - best, d - dampened, h - history,
s - suppressed, S - stale, i - internal, e - external
Origin: i - IGP, e - EGP, ? - incomplete
Network From Flaps Duration Reuse Path/Ogn
de 20.1.1.0/24 10.1.1.2 1 00:02:36 00:53:58 100i
Table 59 Command output
Field Descri
p
tion
Status codes
Status codes:
• * – valid—Valid route.
• > – best—Best route.
• d – damped—Dampened route.
• h – history—History route.
• s – suppressed—Suppressed route.
• S – Stale—Stale route.
• i – internal—Internal route.
• e – external—External route.
Origin
Origin of the route:
• i – IGP—Originated in the AS. The origin of summary routes and
routes advertised with the network command is IGP.
• e – EGP—Learned through EGP.
• ?– incomplete—Unknown origin. The origin of routes redistributed
from IGP protocols is INCOMPLETE.
Network Destination network address.
From Source IP address of the route.
Flaps Number of routing flaps.
Duration Duration time of the flap route.
Reuse Reuse time of the route.