R21xx-HP FlexFabric 11900 Layer 3 IP Routing Command Reference

239
display bgp routing-table ipv4 unicast statistics
Use display bgp routing-table ipv4 unicast statistics to display BGP IPv4 unicast route statistics.
Syntax
display bgp routing-table ipv4 [ unicast ] [ vpn-instance vpn-instance-name ] statistics
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN by its name, a case-sensitive string of 1 to 31
characters. If no VPN is specified, the command displays the BGP IPv4 unicast route statistics for the
public network.
Usage guidelines
The command with the unicast keyword has the same effect as that without the unicast keyword.
Examples
# Display statistics of BGP IPv4 unicast routes for the public network.
<Sysname> display bgp routing-table ipv4 statistics
Total number of routes: 4
display bgp routing-table ipv6 unicast
Use display bgp routing-table ipv6 unicast to display BGP IPv6 unicast routing information.
Syntax
display bgp routing-table ipv6 [ unicast ] [ vpn-instance vpn-instance-name ] [ network-address
prefix-length | advertise-info ] ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN by its name, a case-sensitive string of 1 to 31
characters. If no VPN is specified, the command displays the BGP IPv6 unicast routing information for the
public network.
network-address prefix-length: Specifies the destination network address and prefix length. The value
range for the prefix-length argument is 0 to 128. If this argument is not specified, the command displays
brief information about all BGP IPv6 unicast routing information.