R21xx-HP FlexFabric 11900 Layer 3 IP Routing Command Reference

23
Views
Any view
Predefined user roles
network-admin
network-operator
Examples
# Display the maximum number of ECMP routes.
<Sysname> display max-ecmp-num
Max-ECMP-Num in use: 6
Max-ECMP-Num at the next reboot: 10
Table 7 Command output
Field Descri
p
tion
Max-ECMP-Num in use Maximum number of current ECMP routes in use.
Max-ECMP-Num at the next reboot Maximum number of ECMP routes at the next reboot of the device.
max-ecmp-num
Use max-ecmp-num to configure the maximum number of ECMP routes.
Syntax
max-ecmp-num number
Default
The maximum number of ECMP routes is 8.
Views
System view
Predefined user roles
network-admin
Parameters
number: Specifies the maximum number of ECMP routes, in the range of 1 to 32.
Examples
# Configure the maximum number of ECMP routes as 10.
<Sysname> system-view
[Sysname] max-ecmp-num 10
The configuration will take effect at the next reboot. Continue? [Y/N]:y
Reboot device to make the configuration take effect.
After reboot, the maximum number of ECMP routes is 10.
reset ip routing-table statistics protocol
Use reset ip routing-table statistics protocol to clear IPv4 route statistics.