R21xx-HP FlexFabric 11900 Layer 3 IP Routing Command Reference

339
Views
RIPng view
Predefined user roles
network-admin
Parameters
number: Specifies the maximum number of ECMP routes.
Usage guidelines
The value range for the number argument and the default setting depend on the max-ecmp-num
command.
If you set the maximum number of ECMP routes to m in the max-ecmp-num command, the number
argument in the maximum load-balancing command is in the range of 1 to m and defaults to m.
Examples
# Specify the maximum number of ECMP routes as 2.
<Sysname> system-view
[Sysname] ripng 100
[Sysname-ripng-100] maximum load-balancing 2
Related commands
max-ecmp-num
preference
Use preference to specify the preference for RIPng routes.
Use undo preference to restore the default.
Syntax
preference [ route-policy route-policy-name ] value
undo preference
Default
The preference of RIPng routes is 100.
Views
RIPng view
Predefined user roles
network-admin
Parameters
route-policy route-policy-name: Specifies a routing policy by its name, a case-sensitive string of 1 to 63
characters.
value: Specifies the preference for RIPng routes, in the range of 1 to 255.
Usage guidelines
You can specify a routing policy to set a preference for the matching RIPng routes.
• The preference set by the routing policy applies to all matching RIPng routes. The preference of
other routes is set by the preference command.