R21xx-HP FlexFabric 11900 Layer 3 IP Routing Command Reference

387
Usage guidelines
If multiple routing protocols find multiple routes to the same destination, the router uses the route found by
the protocol with the highest preference.
Examples
# Set a preference of 150 for OSPFv3 routes.
<Sysname> system-view
[Sysname] OSPFv3
[Sysname-OSPFv3-1] preference 150
silent-interface(OSPFv3 view)
Use silent-interface to disable the specified interface from receiving and sending OSPFv3 packets.
Use undo silent-interface to restore the default.
Syntax
silent-interface { interface-type interface-number | all }
undo silent-interface { interface-type interface-number | all }
Default
An interface can receive and send OSPFv3 packets.
Views
OSPFv3 view
Predefined user roles
network-admin
Parameters
interface-type interface-number: Specifies an interface by its type and number.
all: Specifies all interfaces.
Usage guidelines
Multiple processes can disable the same interface from receiving and sending OSPFv3 packets, but the
silent-interface command takes effect only on interfaces enabled with the current process.
Examples
# Disable VLAN-interface 10 from receiving and sending OSPFv3 packets in OSPFv3 processes 100 and
200.
<Sysname> system-view
[Sysname] ospfv3 100
[Sysname-ospfv3-100] router-id 10.100.1.9
[Sysname-ospfv3-100] silent-interface vlan-interface 10
[Sysname-ospfv3-100] quit
[Sysname] ospfv3 200
[Sysname-ospfv3-200] router-id 20.100.1.9
[Sysname-ospfv3-200] silent-interface vlan-interface 10