R21xx-HP FlexFabric 11900 Layer 3 IP Routing Command Reference

426
Predefined user roles
network-admin
network-operator
Parameters
route-policy-name: Specifies a routing policy by its name, a case-sensitive string of 1 to 63 characters.
Without this argument, this command displays information about all routing policies.
Examples
# Display information about routing policy 1.
<Sysname> display route-policy policy1
Route-policy: policy1
permit : 1
if-match cost 10
continue: next node 11
apply comm-list a delete
Table 100 Command output
Field Descri
p
tion
Route-policy Routing policy name.
permit
Match mode:
• permit.
• deny.
if-match Match criterion.
continue Specify the next node to be matched.
apply Action.
if-match as-path
Use if-match as-path to match BGP routes whose AS_PATH attribute matches a specified AS path list.
Use undo if-match as-path to remove the configuration.
Syntax
if-match as-path as-path-number&<1-32>
undo if-match as-path [ as-path-number&<1-32> ]
Default
No match criterion is configured.
Views
Routing policy node view
Predefined user roles
network-admin