R21xx-HP FlexFabric 11900 Layer 3 IP Routing Configuration Guide

287
Static Routing table Status : <Active>
Summary Count : 1
Destination: :: Protocol : Static
NextHop : 4::2 Preference: 60
Interface : Vlan-interface200 Cost : 0
Static Routing table Status : <Inactive>
Summary Count : 0
# Display the IPv6 static route information on Switch B.
[SwitchB] display ipv6 routing-table protocol static
Summary Count : 2
Static Routing table Status : <Active>
Summary Count : 2
Destination: 1::/64 Protocol : Static
NextHop : 4::1 Preference: 60
Interface : Vlan-interface200 Cost : 0
Destination: 3::/64 Protocol : Static
NextHop : 5::1 Preference: 60
Interface : Vlan-interface300 Cost : 0
Static Routing table Status : <Inactive>
Summary Count : 0
# Use the ping command to test the reachability.
[SwitchA] ping ipv6 3::1
PING6(104=40+8+56 bytes) 4::1 --> 3::1
56 bytes from 3::1, icmp_seq=0 hlim=62 time=4.000 ms
56 bytes from 3::1, icmp_seq=1 hlim=62 time=3.000 ms
56 bytes from 3::1, icmp_seq=2 hlim=62 time=2.000 ms
56 bytes from 3::1, icmp_seq=3 hlim=62 time=2.000 ms
56 bytes from 3::1, icmp_seq=4 hlim=62 time=2.000 ms
--- 3::1 ping6 statistics ---
5 packet(s) transmitted, 5 packet(s) received, 0.0% packet loss
round-trip min/avg/max/std-dev = 2.000/10.200/42.000/15.905 ms