R21xx-HP FlexFabric 11900 Layer 3 IP Services Command Reference

166
Field Descri
p
tion
Interface Name of the interface.
Physical
Physical state of the interface:
• *down—The interface has been administratively shut down with the
shutdown command.
• down—The interface is administratively up but its physical state is down.
• up—The administrative and physical states of the interface are both up.
Protocol
Link layer protocol state of the interface:
• down—The network layer protocol state of the interface is down.
• up—The network layer protocol state of the interface is up.
IPv6 Address
IPv6 address of the interface.
• If at least one global unicast address is configured, this field displays the
lowest address.
• If no global unicast address is configured, this field displays the link-local
address.
• If no address is configured, this field displays Unassigned.
display ipv6 interface prefix
Use display ipv6 interface prefix to display IPv6 prefix information on an interface.
Syntax
display ipv6 interface interface-type interface-number prefix
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface-type interface-number: Specifies an interface by its type and number.
Examples
# Display IPv6 prefix information about VLAN-interface 10.
<Sysname> display ipv6 interface Vlan-interface10 prefix
Prefix: 1001::/65 Origin: ADDRESS
Age: - Flag: AL
Lifetime(Valid/Preferred): 2592000/604800
Prefix: 2001::/64 Origin: STATIC
Age: - Flag: L
Lifetime(Valid/Preferred): 3000/2000
Prefix: 3001::/64 Origin: RA