R21xx-HP FlexFabric 11900 Layer 3 IP Services Command Reference

9
Predefined user roles
network-admin
network-operator
Parameters
vpn-instance-name: Specifies the name of a MPLS L3VPN, a case-sensitive string of 1 to 31 characters.
count: Displays the number of ARP entries.
Usage guidelines
This command shows information about ARP entries for a specific VPN, including the IP address, MAC
address, VLAN ID, output interface, entry type, and aging timer.
Examples
# Display ARP entries for the VPN instance named test.
<Sysname> display arp vpn-instance test
Type: S-Static D-Dynamic M-Multiport I-Invalid
IP Address MAC Address VLAN ID Interface Aging Type
20.1.1.1 00e0-fc00-0001 N/A N/A N/A S
Related commands
• arp static
• reset arp
reset arp
Use reset arp to clear ARP entries from the ARP table.
Syntax
In standalone mode:
reset arp { all | dynamic | interface interface-type interface-number | multiport | slot slot-number |
static }
In IRF mode:
reset arp { all | chassis chassis-number slot slot-number | dynamic | interface interface-type
interface-number | multiport | static }
Views
User view
Predefined user roles
network-admin
Parameters
all: Clears all ARP entries.
dynamic: Clears all dynamic ARP entries.
multiport: Clears all multiport ARP entries.
static: Clears all static ARP entries.
slot slot-number: Clears the ARP entries for the interface card specified by the slot number. (In standalone
mode.)