R21xx-HP FlexFabric 11900 Layer 3 IP Services Command Reference

187
Syntax
ipv6 address { ipv6-address prefix-length | ipv6-address/prefix-length } anycast
undo ipv6 address { ipv6-address prefix-length | ipv6-address/prefix-length } anycast
Default
No IPv6 anycast address is configured for an interface.
Views
Interface view
Predefined user roles
network-admin
Parameters
ipv6-address: Specifies an IPv6 anycast address.
prefix-length: Specifies the prefix length in the range of 1 to 128.
Examples
# Set the IPv6 anycast address of VLAN-interface 100 to 2001::1 with prefix length 64.
Method 1:
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] ipv6 address 2001::1/64 anycast
Method 2:
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] ipv6 address 2001::1 64 anycast
ipv6 address auto
Use ipv6 address auto to enable the stateless address autoconfiguration function on an interface, so that
the interface can automatically generate a global unicast address.
Use undo ipv6 address auto to disable this function.
Syntax
ipv6 address auto
undo ipv6 address auto
Default
The stateless address autoconfiguration function is disabled.
Views
Interface view