R21xx-HP FlexFabric 11900 Layer 3 IP Services Command Reference

189
• If the interface has no IPv6 global unicast address configured, it has no link-local address.
Manual assignment takes precedence over automatic generation.
• If you first adopt automatic generation and then manual assignment, the manually assigned
link-local address overwrites the automatically generated address.
• If you first use manual assignment and then automatic generation, the automatically generated
link-local address does not take effect and the link-local address of an interface is still the manually
assigned address.
If you delete the manually assigned address, the automatically generated link-local address is validated.
For more information about manually assignment of an IPv6 link-local address, see the ipv6 address
link-local command.
Examples
# Configure VLAN-interface 100 to automatically generate a link-local address.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] ipv6 address auto link-local
Related commands
ipv6 address link-local
ipv6 address eui-64
Use ipv6 address eui-64 to configure an EUI-64 IPv6 address for an interface.
Use undo ipv6 address eui-64 to remove the EUI-64 IPv6 address of the interface.
Syntax
ipv6 address { ipv6-address prefix-length | ipv6-address/prefix-length } eui-64
undo ipv6 address [ ipv6-address prefix-length | ipv6-address/prefix-length ] eui-64
Default
No EUI-64 IPv6 address is configured for an interface.
Views
Interface view
Predefined user roles
network-admin
Parameters
ipv6-address/prefix-length: Specifies an IPv6 address and IPv6 prefix length. The ipv6-address and
prefix-length arguments jointly specify the prefix of an EUI-64 IPv6 address. The prefix-length argument
ranges from 1 to 64.