R21xx-HP FlexFabric 11900 Layer 3 IP Services Command Reference

218
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface interface-type interface-number: Displays DHCPv6 server configuration information on the
specified interface. If no interface is specified, the command displays DHCPv6 server configuration
information on all interfaces.
Examples
# Display DHCPv6 server configuration information on all interfaces.
<Sysname> display ipv6 dhcp server
Interface Pool
Vlan-interface2 1
Vlan-interface3 global
# Display DHCPv6 server configuration information on the interface VLAN-interface 2.
<Sysname> display ipv6 dhcp server interface vlan-interface 2
Using pool: 1
Preference value: 0
Allow-hint: Enabled
Rapid-commit: Disabled
Table 49 Command output
Field Descri
p
tion
Interface Interface enabled with DHCPv6 server.
Pool
Address pool applied to the interface.
If no address pool is applied to the interface, global is displayed. The
DHCPv6 server selects a global address pool to assign a prefix, an
address, and other configuration parameters to a client.
Using pool
Address pool applied to the interface.
If no address pool is applied to the interface, global is displayed. The
DHCPv6 server selects a global address pool to assign a prefix, an
address, and other configuration parameters to a client.
Preference value
Server preference in the DHCPv6 Advertise message. The value range is
0 to 255. The bigger the value is, the higher preference the server has.
Allow-hint Indicates whether desired address/prefix assignment is enabled.
Rapid-commit Indicates whether rapid address/prefix assignment is enabled.
display ipv6 dhcp server conflict
Use display ipv6 dhcp server conflict to display information about IPv6 address conflicts.
Syntax
display ipv6 dhcp server conflict [ address ipv6-address ]