R21xx-HP FlexFabric 11900 Layer 3 IP Services Command Reference

246
Do not enable the DHCPv6 client and the DHCPv6 relay agent on the same interface.
Examples
# Enable the DHCPv6 relay agent on VLAN-interface 2 and specify the DHCPv6 server address
2 0 01:1: : 3.
<Sysname> system-view
[Sysname] interface vlan-interface 2
[Sysname-Vlan-interface2] ipv6 dhcp select relay
[Sysname-Vlan-interface2] ipv6 dhcp relay server-address 2001:1::3
Related commands
• display ipv6 dhcp relay server-address
• ipv6 dhcp select
reset ipv6 dhcp relay statistics
Use reset ipv6 dhcp relay statistics to clear packets statistics on the DHCPv6 relay agent.
Syntax
reset ipv6 dhcp relay statistics [ interface interface-type interface-number ]
Views
User view
Predefined user roles
network-admin
Parameters
interface interface-type interface-number: Specifies an interface by its type and number. If no interface is
specified, the command clears all relay agent statistics.
Examples
# Clear packet statistics on the DHCPv6 relay agent.
<Sysname> reset ipv6 dhcp relay statistics
Related commands
display ipv6 dhcp relay statistics