R21xx-HP FlexFabric 11900 Layer 3 IP Services Command Reference

252
Protocol: (s) - spoofing
Interface Link Protocol Main IP Description
Tun1 UP UP 1.1.1.1 aaaaaaaaaaaaaaaaaaaaaaaaaaaaa
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
Table 58 Command output
Field Descri
p
tion
The brief information of
interface(s) under route mode
Brief information about Layer 3 interfaces.
Link: ADM - administratively
down; Stby - standby
Link status:
• ADM—The interface has been administratively shut down. To recover its
physical state, perform the undo shutdown command.
• Stby—The interface is a backup interface. To see the primary interface,
use the display standby state command.
Protocol: (s) - spoofing
(s) indicates that the network layer protocol state is UP, but the link is not
available because it is an on-demand link or not present at all.
Interface Abbreviated interface name.
Link
Physical link state of the interface:
• UP—The link is physically up.
• DOWN—The link is physically down.
• ADM—The link has been administratively shut down. To bring it up,
perform the undo shutdown command.
• Stby—The interface is a backup interface.
Protocol
Protocol state:
• DOWN—The protocol is disabled.
• UP—The protocol is enabled.
Main IP Primary IP address of the interface.
Description Description of the interface.
Related commands
• destination
• interface tunnel
• source
interface tunnel
Use interface tunnel to create a tunnel interface, specify the tunnel mode, and enter tunnel interface view.
Use undo interface tunnel to delete a specific tunnel interface.
Syntax
interface tunnel number [ mode { gre [ ipv6 ] | ipv4-ipv4 | ipv6 | ipv6-ipv4 [ 6to4 | isatap ] } ]
undo interface tunnel number