R21xx-HP FlexFabric 11900 Layer 3 IP Services Command Reference

27
DHCP commands
dhcp enable
Use dhcp enable to enable DHCP.
Use undo dhcp enable to disable DHCP.
Syntax
dhcp enable
undo dhcp enable
Default
DHCP is disabled.
Views
System view
Predefined user roles
network-admin
Usage guidelines
Enable DHCP before you perform DHCP server or relay agent configurations.
Examples
# Enable DHCP.
<Sysname> system-view
[Sysname] dhcp enable
dhcp select
Use dhcp select to enable the DHCP server or DHCP relay agent on an interface.
Use undo dhcp select to disable the DHCP server or DHCP relay agent on an interface. The interface
discards DHCP packets.
Syntax
dhcp select { relay | server }
undo dhcp select { relay | server }
Default
The interface operates in DHCP server mode and responds to DHCP requests with configuration
parameters.