R21xx-HP FlexFabric 11900 Layer 3 IP Services Configuration Guide

167
[SwitchA-dhcp6-pool-1] quit
# Configure the DHCPv6 address pool 2 to assign IPv6 addresses and other configuration
parameters to clients in subnet 1::2:0:0:0/96.
[SwitchA] ipv6 dhcp pool 2
[SwitchA-dhcp6-pool-2] network 1::2:0:0:0/96 preferred-lifetime 432000
valid-lifetime 864000
[SwitchA-dhcp6-pool-2] domain-name aabbcc.com
[SwitchA-dhcp6-pool-2] dns-server 1::2:0:0:2
[SwitchA-dhcp6-pool-2] quit
Verifying the configuration
After the preceding configuration is complete, the clients in subnets 1::1:0:0:0/96 and 1::2:0:0:0/96
can obtain IPv6 addresses and other configuration parameters from the DHCPv6 server (Switch A). You
can use the display ipv6 dhcp server ip-in-use command to display IPv6 addresses assigned to the
DHCPv6 clients.